TWP 200 Series Stain for Cedar Shakes, Shingles and Siding

TWP 200 Series Total Wood Protectant is a high-solids, heavy-duty penetrating stain that TWP designed to extend the life of cedar shakes and shingles. It also works on rough-sawn cedar, siding, log homes, fences, fascia, shutters and landscape timbers. It's a one-coat system with under 100 g/L VOC, so it can be sold in all 50 states. This listing is a 1 gallon can in 8 colors. For larger jobs, see the 5 gallon pail.

TWP 200 Quick Facts

Type	Oil-based, penetrating, semi-drying stain. It soaks in instead of forming a film.
Best for	Cedar shakes and shingles (including aged shake roofs), rough-sawn cedar, siding, log homes, fences, fascia, shutters, landscape timbers. Above-ground, exterior use only.
Coats	1
Coverage	100-250 sq ft per gallon, depending on how porous the wood is
VOC	Under 100 g/L. Complies with all current federal and state VOC rules.
Dry time	Generally dry to the touch overnight (ideal conditions 75°F, 50% humidity)
Apply at	50-90°F, with no rain or cold for 48 hours after
Clean-up	Mineral spirits

Why Use TWP 200 on Cedar Shakes and Shingles?

Made for shakes and shingles: TWP says the formula helps reduce grain cracking, cupping, surface erosion and water absorption on aged roofing and siding.
Restores weathered wood: it soaks into dry, porous wood and adds bulk and flexibility to brittle shingles.
Resists growth: the stained surface resists mold, mildew, algae and moss.
Low VOC: under 100 g/L, the lowest-VOC TWP, legal in every state.
Easy upkeep: it penetrates instead of forming a film, so it won't peel, and you can add a color maintenance coat when needed.

TWP 200 Colors

Choose from 200 Clear, 201 Cedartone, 202 Redwood, 203 Gold, 205 California Cedar, 206 Russet Brown, 207 Butternut and 210 Slate Gray. TWP says the colors can be mixed together, and 200 Clear can be added to lighten a color. Wood porosity changes the final look, so test a small area first. See all TWP colors by series in our TWP stain colors guide.

How to Apply TWP 200

Prep: let new wood weather 4-12 months. Clean new or gray wood with Restore-A-Deck or a bleach-and-water solution, rinse, and let it dry at least 48 hours. Any other finish must be removed first.
Mix, don't thin: stir well before and during use.
Apply one coat with a brush, pad, roller, pump sprayer or airless sprayer until the wood is saturated, and back brush for even color. Work 2-3 boards or shingle courses at a time to avoid lap marks.
Wipe off the excess: remove any stain that hasn't soaked in after 30-60 minutes. Extra stain left on the surface stays shiny, dries slowly and can fail early.

TWP 200 vs TWP 100 and 1500

TWP 200 is the heavy-duty, one-coat formula for shakes, shingles and rough wood. For decks, TWP's go-to products are TWP 1500 (350 g/L VOC, all 50 states) and TWP 100 (550 g/L, not sold in VOC-regulated states). Compare them in TWP 100 vs 1500 or see the full TWP stain line.

TWP 200 FAQ

Is TWP 200 good for a cedar shake roof?

Yes. TWP designed the 200 Series to extend the service life of shakes and shingles, including aged roofing.

How much TWP 200 do I need?

Plan on 100-250 sq ft per gallon. Dry, weathered shakes soak up more. A 1,000 sq ft shake roof or wall needs roughly 4-10 gallons. See our coverage guide.

Can TWP 200 be shipped to every state?

Yes. At under 100 g/L VOC, it complies with all current federal and state VOC rules.

Where can I buy TWP 200 stain?

Right here. TWP isn't carried at Home Depot or Lowe's. Orders placed before 4pm ET ship the same day, with free shipping. Questions? Email Sales@TheStainDepot.com.

Helpful guides: TWP stain colors by series | TWP 100 vs TWP 1500