Cabot Australian Timber Oil
Cabot Australian Timber Oil
Cabot Australian Timber Oil is a penetrating, oil-modified finish that brings out the warm, rich tones of decks, siding, railings and outdoor furniture. It soaks into the wood to help protect against moisture and UV damage while showing off the grain.
Colors & Formulas
The standard formula comes in Amberwood, Honey Teak, Jarrah Brown, Mahogany Flame and Natural. For VOC-regulated states, the Australian Timber Oil VOC formula is compliant in all 50 states. Both are available in 1 gallon cans and 5 gallon pails (standard and VOC). See our guide to Cabot Australian Timber Oil colors for help picking a shade.
Australian Timber Oil vs Australian Timber Oil Low VOC
| Australian Timber Oil | Australian Timber Oil Low VOC |
|---|
| Base | Oil (linseed, tung and alkyd blend) | Low VOC three-oil formula |
| Coverage | 250–600 sq ft per gallon | 250–350 sq ft per gallon |
| Coats | 1 coat | 1 coat |
| Dry time | 24–48 hours | 24–48 hours |
| Cleanup | Mineral spirits | Warm, soapy water |
| Ships to | Non-VOC-regulated states (see product page) | All 50 states |
| Shop | 1 Gallon | 5 Gallon Pail | 1 Gallon | 5 Gallon Pail |
Coverage, dry time and cleanup from Cabot's product information. Coverage varies with wood porosity; rough or weathered wood uses more.
What Wood Is Australian Timber Oil For?
Australian Timber Oil is made for exterior wood: decks, siding, railings and outdoor furniture. Its three-oil blend was formulated to penetrate dense, resin-rich hardwoods such as ipe, teak, mahogany and tallowwood. The finish is transparent, so it shows off the grain rather than covering it.
How to Apply Cabot Australian Timber Oil
- Prep: start with clean, dry, bare wood. Clean and brighten the surface, and strip any old film-forming finish first.
- Weather: apply when air and surface temperatures are between 50°F and 90°F.
- Apply: shake well, then use a natural-bristle brush or stain pad. If spraying, back-brush right away.
- One coat: Cabot calls for a single coat. Allow 24–48 hours to dry.
Full step-by-step instructions: How to apply Cabot Australian Timber Oil.
Cabot Australian Timber Oil FAQ
Does Australian Timber Oil need two coats?
No. Cabot's directions call for one coat of either formula.
Which formula can ship to my state?
The Low VOC formula ships to all 50 states. The standard formula can't be shipped to VOC-regulated states; the full list is on the standard formula product page.
How much do I need?
Divide your square footage by the coverage above, using the low end for rough or weathered wood. Our stain calculator guide walks through measuring decks, railings and stairs.
Can I use it on ipe and other hardwoods?
Yes. It was originally developed for dense hardwoods. For an ipe-specific option, compare Deckwise Ipe Oil.
Orders placed before 4pm ET ship the same day. Questions? Email Sales@TheStainDepot.com.
