Expert Stain and Seal Review: Colors, Coverage & Which One to Buy

Expert Stain and Seal semi-transparent deck and fence stain gallon

The short version: Expert Stain and Seal (EXPERT Stain & Seal) is a penetrating, oil-based stain made by Stain & Seal Experts. It soaks into the wood instead of forming a film, so it fades over time rather than peeling. It comes in three looks and 19 colors, including Clear:
  • Transparent for new wood when you want the most grain to show
  • Semi-Transparent for richer color with grain still visible
  • Semi-Solid for older or mismatched wood that needs more color

We sell a lot of Expert Stain and Seal, and the questions we hear most are the same ones people type into Google: what the colors really look like, how much to buy, and how it compares to brands like Ready Seal. This guide answers all of them in one place.

What is Expert Stain and Seal?

Expert Stain and Seal is made by Stain & Seal Experts and sold under the EXPERT name. It is a mineral oil-based, solvent-free penetrating stain with no linseed or other vegetable oils, which the manufacturer says helps avoid the mildew and algae growth vegetable oils can feed. It is ultra-low VOC and 50-state compliant, so it can ship anywhere in the country.

Because it penetrates rather than coats, Expert does not crack or peel like a film-forming stain. As it weathers it slowly fades, which makes recoating simple: clean the wood and apply a fresh coat, with no stripping.

The manufacturer recommends it for western red cedar, pine, pressure-treated lumber, cypress, Douglas fir, redwood, spruce and other exterior wood, on fences, decks, pergolas, siding, shakes and log homes.

Expert Stain and Seal colors (color chart)

All Expert colors look darker when first applied and settle to their true color in about one to two weeks. Your wood species, age and texture also change the final look, so always test a small area first.

Transparent colors

Best for new or nearly new wood when you want a natural look with the most grain showing.

Clear
Natural
Honey
Cedar
Redwood

Shop Expert Transparent 1 gallon or the 5 gallon pail.

Semi-Transparent colors

The most popular choice for fences and decks: deeper color and better protection from fading, while the grain still shows. Pecan and Chestnut are two of the most searched Expert colors.

Pecan
Chestnut
Mahogany
Sequoia
Walnut

Shop Expert Semi-Transparent 1 gallon or the 5 gallon pail.

Semi-Solid colors

The most pigment of the three. A good fit for older, weathered or mismatched boards and for high-traffic decks, while still letting some texture show.

Palomino
Auburn
Sable
Chocolate
Cape Cod Gray
Eucalyptus
Black

Also available in Barnwood and Slate Gray. Shop Expert Semi-Solid 1 gallon or the 5 gallon pail.

Which Expert Stain and Seal should I buy?

Transparent

New cedar, pine or pressure-treated wood where you want the wood itself to be the star. Lowest pigment, so plan on recoating sooner.

Semi-Transparent

Most fences and decks. Richer color, more fade protection, and the grain still shows through.

Semi-Solid

Older, weathered or mismatched wood, and decks that see heavy foot traffic. The most color and coverage of the three.

Rule of thumb: the more pigment, the longer the color holds. If you are unsure, Semi-Transparent is the safe middle choice.

How much Expert Stain and Seal do I need?

Expert soaks deep into the wood, so it covers less area per gallon than a film-forming stain. The manufacturer's guidelines:

SurfaceApprox. coverage per gallon
Fences (flood coat)125–150 sq ft
Decks (apply and back-brush)175–200 sq ft

Rough-sawn and weathered wood drinks the most stain, so use the lower number. Example: a 6 ft tall, 100 ft long fence stained on both sides is 1,200 sq ft, which works out to roughly 8 to 10 gallons, or two 5 gallon pails. Our stain coverage guide walks through the math for any project.

How to apply Expert Stain and Seal

  1. Prep the wood. Clean it and let it dry. If you used a bleach-based cleaner or a stripper, neutralize it with a wood brightener before staining. Expert's own wood cleaner & brightener kit is made for this.
  2. Check that it is dry and absorbent. Sprinkle water on the wood. If it beads up instead of soaking in, wait or prep more.
  3. Mix well. Stir thoroughly, and if you have more than one pail, pour them together into one container so the color stays consistent.
  4. Apply. Spray, roll, brush or use a stain mitt. On fences, a heavy flood coat works well. On decks, apply and back-brush, then brush out or wipe up any puddles so the stain soaks in instead of sitting on top.
  5. Be patient with the color. It looks darker at first and settles in over one to two weeks.

The manufacturer says Expert can be applied in any temperature and even in direct sun, though cold weather slows drying. Do not mix it with other stain brands.

Our take: Expert Stain and Seal pros and cons

What we like
  • Penetrating oil that fades instead of peeling
  • Easy recoats with no stripping
  • Three opacities and 19 colors in one line
  • No linseed or vegetable oils
  • Ultra-low VOC and 50-state compliant
  • Very forgiving to apply, even for first-timers
What to know before you buy
  • Lower coverage per gallon than film stains, so buy enough
  • Color takes 1–2 weeks to settle to its true shade
  • Transparent and Clear need recoating sooner than pigmented colors
  • Wood has to be dry and absorbent, or it will not soak in

Expert Stain and Seal vs Ready Seal

Both are penetrating, oil-based stains that are forgiving to apply, and we stock both. The biggest difference is choice: Expert comes in Transparent, Semi-Transparent and Semi-Solid, so you can pick how much color and grain you want. Ready Seal is a single semi-transparent formula in a range of colors. If you are staining older or weathered wood that needs more coverage, Expert Semi-Solid gives you an option Ready Seal does not. Shop Ready Seal or compare more brands on our deck & fence stain page.

Where to buy Expert Stain and Seal

Many hardware stores do not carry Expert, which is why so many people search for it near them. The Stain Depot is an authorized Expert dealer with every color in stock in 1 gallon cans and 5 gallon pails. Orders placed before 4pm ET ship the same day, and shipping is free in the lower 48.

Shop all Expert Stain and Seal →

Expert Stain and Seal FAQ

Is Expert Stain and Seal oil-based?

Yes. It is a mineral oil-based, solvent-free penetrating stain with no linseed or other vegetable oils.

How many colors does Expert Stain and Seal come in?

19 colors, including Clear, across three opacities: Transparent, Semi-Transparent and Semi-Solid.

Why does my Expert stain look darker than the color chart?

Expert colors go on darker and settle to their true color over about one to two weeks.

Can Expert Stain and Seal go over an old stain?

It can go over a previous coating if the surface is clean, dry and absorbent. Film-forming finishes such as paints or solid stains may need to be sanded or stripped first so the oil can soak in.

Can I apply Expert in cold weather?

The manufacturer says it can be applied in any temperature and in direct sunlight. Cold weather will extend the drying time.

Where can I buy Expert Stain and Seal?

Right here at The Stain Depot, an authorized Expert dealer. Every color ships free in the lower 48.

Nov 20th 2026 The Stain Depot

Newest Guide & Blog Updates