Call Us (313) 242-1000

Ultra Premium Red Label Penofin

Free Shipping on all 5 Gallon Pails!

$47.99$219.99
Clear
SKU: N/A Categories: , Tags: , , ,

Description

Color Chart:

Penofin Ultra red color chart

  • Ultra Premium Formula Wood Stain for Extra Performance
  • Increased transoxide pigments for 99% ultraviolet protection against fading
  • Extra protection against mildew
  • Ten transparent wood stain tones
  • Brazilian Rosewood Oil wood stain that deeply penetrates to protect against moisture
  • Pigments won’t fade, turn chalky or wash off
  • 1 coat application
  • 300-400 sq ft per gallon coverage
  • 250 VOC

This Ultra Premium Red Label Penofin wood stain was created to meet the demand for an exterior wood finish that outperforms all other transparent wood stains. The highly-penetrating Brazilian Rosewood Oil base, from sustainably harvested seeds, protects and nourishes wood fibers far deeper than any other stain. With the added mildew protection the “dark menace” will not attack wood so easily, and helps preserve that freshly-milled look. Penofin Ultra Premium Red Label wood stain is perfect where rain, wind, snow, or high elevations are encountered. The formula in Ultra Premium Red Label wood stain is the result of extensive testing, and the use of the highest quality ingredients. Penofin wins the “Battle Of The Stains” penetration tests over all competitors, and gives longer life to wood of any species. Easy to apply and simple to maintain.

Caution & Warnings
  • Combustible – keep this product away from heat, open flame, and sparks.
  • Beware of spontaneous combustion. Make certain all rags or other materials used with Penofin are soaked in water, stored in an air-tight container, or otherwise disposed of safely.
Application
  • Use WoodrichStripper to remove any non-Penofin stain. If wood is gray use Woodrich Brightener to restore the wood’s original appearance.
  • SHAKE WELL BEFORE USING. DO NOT add thinning or blending agents.
  • Apply Penofin to a clean dry surface. Surface must be free of dirt and sawdust build-up. Do not apply when wood is hot to the touch. Minimum temperature is 45 degrees Fahrenheit.
  • Brush on, use a stain pad, or spray on using a pump up sprayer equipped with plastic tip.
  • To allow for maximum penetration wait 30 minutes, then use a nap-free shop cloth and wipe the entire surface, removing excess product.
  • Surface will be dry to the touch in three hours, and ready for use in 12 hours.
  • When using the one-coat formula, the application is now complete.
  • Do not apply wet-on-wet.
  • If using the two-coat formula, wait a minimum of three hours and apply a light second coat and again wipe any excess from the entire application area after 30 minutes.
Product Performance Warranty

PENOFIN® exterior finishes are warranted to perform when applied to wood surfaces according to label instructions. For Blue Label Penofin expect 2 – 5 years on vertical surfaces, 1 – 2 years on horizontal surfaces depending on use and weather exposure. We recommend preserving the beauty of your horizontal surfaces by staining every 9 – 24 months.

Color Test

We have samples for you to test your color on you own wood. It is best to test PENOFIN on your wood to determine the desired color. The shade can be affected by the type of wood, the manner applied, the length of time the oil is left on, and by the number of coats. If the desired color is attained with one coat of a pigmented formula, the wet-sand process may be done with PENOFIN Natural.

Maintenance
  • When you use Penofin, maintenance is a snap. Because Penofin is a low-solid product, there is no stripping or sanding necessary. Simply wash the surface with water and a mild detergent. Allow your wood surface to dry completely, approximately 48 hours before application.
  • Follow the application methods listed on the previous page for a fresh and beautiful wood surface.
Coverage

Coverage depends on application method, texture, and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.

Cleanup
  • Penofin is an oil-based product. Clean brushes and other application materials with mineral spirits or paint thinner.
  • AVOID SPONTANEOUS COMBUSTION of oily rags. Soak all used cloths in a covered metal bucket of water, ensuring the cloths are completely covered with water. Cover until they can be properly disposed at your local hazardous materials drop-off.

According to the Columbia Encyclopedia, Sixth Edition. 2001, “Spontaneous combustion is a phenomenon in which a substance unexpectedly bursts into flame without apparent cause. In ordinary combustion, a substance is deliberately heated to its ignition point to make it burn. Many substances undergo a slow oxidation that, like the rapid oxidation of burning, releases heat. If the heat so released cannot escape the substance, the temperature of the substance rises until ignition takes place. Spontaneous combustion often occurs in piles of oily rags, green hay, leaves, or coal; it can constitute a serious fire hazard.”

Hardwood Application

Use a brush or sprayer. Brushing gives best results. Brush thoroughly and back brush Penofin into the wood leaving no excess. Wipe entire surface after 20-30 minutes with a nap-free cloth. Do not allow film to develop on wood surface. Apply when there is no chance of rain during the process or during the twelve-hour drying time. If rain occurs spots may develop on wood surfaces. Do not apply in direct hot sun! A minimum air temperature of 45° is required during application and drying time.

Repeat this application within 3-6 months and again within 10-12 months. Over time the wood fibers will become fully protected and maintenance will become less frequent. Product should be applied more often to horizontal areas and also areas with high ultra-violet exposure or heavy traffic. Store all oily cloths in water in a metal bucket until properly disposed.

Coverage

400 square feet per gallon.

Maintenance
  • When you use Penofin maintenance is a snap. Because Penofin is a low-solid product, there is no stripping or sanding necessary. Simply wash the surface with water and a mild detergent. Allow wood surface to dry completely, approximately 48 hours.
  • Follow the application methods listed on the previous page for a fresh and beautiful wood surface
Trouble-Shooting A Sticky-Tacky Surface

Avoid overapplication by following the instructions we just covered. In the event of an overapplication, use the following methods to resolve.

To Remove Excess
  • Allow Penofin to dry for seven days.
  • Use Penofin Protech Cleaner and scrub the surface with a nylon or natural bristle brush. Do not use metal brushes.
  • You may also use Penofin Wood Stripper for tough jobs.
  • Allow the surface to dry for 48 hours before reapplying

CAUTION COMBUSTIBLE! Keep this product away from heat, open flame, and sparks. Avoid prolonged contact with skin and breathing vapor or spray mist. Use only with adequate ventilation. Do not take internally. Shelf life is limited once factory seal is broken; secure lid tightly after use. Avoid spontaneous combustion – make sure all rags and brushes are soaked in water, stored in an airtight container, or otherwise disposed of safely.

KEEP THIS AND ALL PENOFIN PRODUCTS OUT OF THE REACH OF CHILDREN.

Save

Save

Save

Save

Additional information

Weight 42 lbs
Dimensions 1 × 1 × 1 in
SIZE

1 Gallon, 5 Gallon Pail

COLOR

Clear, Transparent Bark, Transparent Cedar, Transparent Chestnut, Transparent Hickory, Transparent Mission Brown, Transparent Redwood, Transparent Sable, Transparent Sierra, Transparent Western Red Cedar