Flood

Easy Seal by Flood Semi-Transparent Oil-Based Stain & Sealer – 1 Gallon

No reviews yet Write a Review
Ask Questions

Easy Seal by Flood Semi-Transparent Oil-Based Stain & Sealer – 1 Gallon

$46.95

Free Shipping!

  • SKU: FES-1G
In Stock & Ready To Ship!
Current Stock:Only left:
Description

Easy Seal by Flood Semi-Transparent Oil-Based Stain & Sealer – 1 Gallon

Easy Seal by Flood is a premium oil-based, semi-transparent stain and sealer made for people who want a great-looking fence, deck or siding in one easy pass. Apply one thin coat, skip the back-brushing on vertical surfaces, and let the formula level out its own laps and streaks. It is fortified with Penetrol® additive so it soaks deep into the wood, and it comes ready-mixed in 8 colors.

  • One coat
  • No back-brushing on fences & siding
  • Applies down to 35°F
  • Penetrol® fortified
  • 8 ready-mixed colors
  • Free shipping

Why DIYers and contractors choose Easy Seal

  • One thin coat and done. There is no second coat to schedule, so a fence or deck is usually a one-day job.
  • No back-brushing on fences and siding. Spray it with a pump-up or airless sprayer and laps, runs and streaks level out on their own.
  • Stains in cool weather. Air and surface can be anywhere from 35°F to 120°F, so your season starts earlier and ends later than with most stains.
  • Shrugs off a surprise shower. On vertical surfaces it withstands light rain minutes after application.
  • Deep penetration. Penetrol® additive helps the oil soak into the wood instead of sitting on top, so it resists cracking, flaking and peeling.
  • Weather protection. UV blockers help fight graying, and the water-resistant finish helps protect the wood from water damage.
  • Your choice of tools. Pump-up sprayer, airless sprayer, natural-bristle brush or roller.

Specifications

Product typeAlkyd-oil, semi-transparent, no sheen (penetrating, not a film)
Size1 U.S. gallon
Coverage per gallon300–400 sq ft on rough or weathered wood
400–500 sq ft on smooth wood and hardwoods
CoatsOne thin coat
Application temperature35°F to 120°F air and surface; stay above 35°F for 24 hours
Dry timeAbout 24 hours at 50–85°F (longer when cool or humid)
Foot traffic & furniture24–48 hours
RainDecks: no rain expected for 24 hours. Fences & siding: withstands light rain minutes after application
Use onExterior wood only: decks, fences, siding and trim
Application toolsPump-up sprayer, airless sprayer, natural-bristle brush or roller
ThinningDo not thin
CleanupMineral spirits
VOCLess than 275 g/L
Colors8 ready-mixed colors (do not tint)
ManufacturerFlood, part of The Pittsburgh Paints Company (formerly PPG)

The 8 Easy Seal colors

Choose your color from the options above. Semi-transparent stain lets the wood grain show through, so the final look depends on your wood. Try a small, out-of-the-way spot first.

  • NaturalLightest option. Enhances the wood's own tone
  • Natural CedarWarm, golden cedar look
  • PecanMedium warm brown
  • RedwoodClassic red redwood tone
  • MahoganyRich reddish brown
  • Mission BrownDeep chocolate brown
  • Dark WalnutDark, rich brown
  • Burnt HickoryOur darkest Easy Seal color

How much Easy Seal do I need?

Measure the length times the height of each surface you are staining (both sides of a fence count separately), then divide by the coverage for your wood. Rough-sawn and weathered wood drinks more stain.

ProjectApprox. areaGallons
12' x 16' deck, floor only192 sq ft1
6' tall fence, 50' long, one side300 sq ft1
6' tall fence, 100' long, both sides1,200 sq ft3–4 (a 5 gallon pail is the better value)

Need more than 3 gallons? The Easy Seal 5 gallon pail costs less per gallon. Use our deck stain coverage guide for odd-shaped projects.

How to apply Easy Seal

  1. Clean the wood. Remove dirt, mildew and loose fibers. Clean weathered or gray wood with a wood cleaner, rinse well and let it dry.
  2. Do the water test. Sprinkle water on the wood. If it soaks in within 30 seconds to 2 minutes, the wood is ready for stain.
  3. New or pressure-treated wood: sand off the shiny mill glaze and make sure the wood passes the water test before staining.
  4. Old stain: Easy Seal can go over a weathered semi-transparent stain that is in sound condition. Sand, scrape or wire-brush off anything loose or peeling, and fully remove any finish that is failing.
  5. Fences and siding: spray one board at a time from 6 to 8 inches away. No back-brushing or rolling needed.
  6. Decks: apply one thin coat and do not let it puddle. Brush out any puddles so the stain soaks in evenly.
  7. Clean up with mineral spirits.

Safety: rags and waste soaked with oil-based stain can catch fire on their own. Put them in a sealed, water-filled metal container right after use.

Easy Seal vs Ready Seal

Both are oil-based, semi-transparent, one-coat stain and sealers that are forgiving for first-timers, and we stock both. Easy Seal brings Flood's Penetrol additive and a 35°F minimum application temperature. See our full side-by-side in Easy Seal by Flood vs Ready Seal, or shop Ready Seal.

Easy Seal FAQs

Who makes Easy Seal by Flood?
Flood, the wood care brand behind Penetrol®, part of The Pittsburgh Paints Company (formerly PPG).
How much does a gallon of Easy Seal cover?
300 to 400 sq ft on rough or weathered wood and 400 to 500 sq ft on smooth wood and hardwoods, in one coat.
Do I need to back-brush Easy Seal?
Not on fences and siding. When you spray vertical surfaces as directed, it levels out without back-brushing or rolling. On decks, brush out any puddles so the stain does not sit on top.
How many coats of Easy Seal do I need?
One thin coat.
Can I apply Easy Seal in cold weather?
Yes, down to 35°F air and surface temperature, as long as it stays above 35°F for the next 24 hours. It dries fastest between 50°F and 85°F.
How long before rain or walking on the deck?
Fences and siding withstand light rain minutes after application. On decks, apply when no rain is expected for 24 hours and wait 24 to 48 hours before light foot traffic or putting furniture back.
Can I use Easy Seal on new or pressure-treated wood?
Yes. Sand off the mill glaze and make sure water soaks into the wood within 30 seconds to 2 minutes before you stain.
Can Easy Seal go over my old stain?
It can go over a weathered semi-transparent stain that is still in sound condition. Remove anything loose or peeling first, and fully strip a finish that is failing.
What do I clean up with?
Mineral spirits. Do not thin the stain.
Does Easy Seal ship free?
Yes. Every gallon ships free in the lower 48. Orders placed before 4pm ET ship the same day.