Messmer’s UV Plus for Hardwoods 5 Gallon Pail

Free Shipping on all 5 Gallon Pails!

$239.95

Description

Messmer’s UV Plus Hardwoods (high VOC) comes in a 5-gallon pail and is a premium natural wood finish which protects and beautifies exterior wood decks and other wood projects. For dense exotic hardwoods like IPE, Mahogany, Brazilian Redwood, Massaranduba, Meranti, Pau Lupe, and Teak. It is an oil-based stain that penetrates. Messmer’s UV plus for Hardwoods a top rated stain for IPE.

Messmer’s UV Plus for hardwood decks ships same day by 4:00

Messmer's UV plus for Hardwoods

Messmer’s UV Plus Hardwoods is not compliant and cannot be shipped to the following states:

California, Colorado, Connecticut, Delaware, District of Columbia, Maine, Maryland, New Hampshire, New Jersey, New York, Northern Virginia, Pennsylvania, Ohio, Illinois, Massachusetts, Indiana , Utah, Rhode Island and Maricopa County in AZ.

Please order Messmer’s UV Plus VOC compliant version here

Messmer’s UV Plus for Hardwood Decks Coverage:

  • 1 gallon for every 250-400 square feet of wood
  • Available in 100 VOC, 250 VOC, 550 VOC.
  • Comes in Natural and Red Mahogany
  • Hardwood Decks needs to be sealed every one to two years

Advantages of Messmer’s UV Plus for Hardwood deck features:

  • It has excellent resistance to UV degradation
  • It is available in 2 colors – Natural and Red Mahogany
  • Has a Mildew resistant coating
  • Specially formulated for Ipe and other hardwoods
  • 1 coat application
  • Avoid over application
  • Oil-based with paint thinner cleanup
  • Can be shipped any where in USA  including Canada

What is Messmer’s UV Plus for Hardwood Decks?

Messmer’s UV Plus for Hardwood Decks is a penetrating wood deck stain and oil finish that beautifies and protects exterior wood, providing a natural appearance. UV Plus for Hardwood Decks contains fungicides and UV absorbers of the highest quality. It does not form a surface film when properly applied and is not subject to peeling and flaking. To recoat, just clean the wood surface and reapply UV Plus for Hardwood Decks. No stripping or sanding is necessary. The product may be used on nearly any exterior hardwood surface including decks, vertical surfaces, and trim.  For use on wood substrates only.

How long does Messmer’s UV Plus for Hardwoods last?

On hardwood decks, UV Plus can be expected to last for 1-2 years. The time element will vary depending on conditions such as sunlight, weather and direction of exposure.

Clear finish?

Clears with no pigmentation do not offer UV protection or color retention. Our products contain Transparent Iron Oxide pigments which absorb UV radiation while allowing visible light to pass through. This results in a finish that highlights the natural beauty of the wood while still protecting it.

Messmer’s UV Plus for Hardwoods can be applied over another stain

  • Provided the previous finish has sufficiently weathered to allow penetration of UV Plus for Hardwood Decks.
  • Before application, clean the surface with Wood & Deck Cleaner or sand to a new surface.

While UV Plus for Hardwood Decks bead water

  • This means that waxes are added for the appearance of water beading. These additives do not last very long and are not good permanent water repellents, in addition to this they interfere with adhesion should you decide to paint over the stain. That’s why we don’t use them in our products.
  • Messmer’s UV Plus for Hardwood Decks fills the pores of the wood, providing excellent water repellency that will last.

Wait 24-48 hours if rain is expected

  • Hardwood Decks needs at least 24-48 hours to dry in good conditions before staining.
  • Rain can force the stain up out of the pores of the wood, leaving a blotchy appearance.

Messmer’s UV Plus for Hardwood Decks suitable for vertical surfaces

  • Excellent choice for almost any exterior hardwood surface, including vertical surfaces.
  • Make sure the surface is clean, dry, and any previous coatings have either weathered away or been removed.
  • Do not use UV Plus for Hardwood Decks over paints or other film forming coatings, it’s designed to penetrate into bare or weathered wood surfaces.

Should I put multiple coats of Messmer’s Hardwood stain

  • No. The only way to get a shiny surface on the wood is by using a multiple coat, film forming finish. We don’t recommend clear film forming finishes on decks because they are slippery when wet, they will eventually peel, and they are difficult to maintain and recoat. When properly applied, a penetrating finish like UV Plus for Hardwood Decks will not be shiny, it will have a natural, matte look.
  • Messmer’s UV Plus for hardwoods in a matte finish

Messmers on other surfaces that are made of cedar and pressure treated wood.

  • Generally UV Plus for Hardwood Decks can be used on other types of exterior wood.
  • Overall appearance of dissimilar woods will not be the same after applying the UV Plus

Application of Messmer’s for Hardwoods stain:

  • Overall best to apply by natural bristle brush or roller and roller pans, 3/8″ nap roller cover.
  • Do not begin until you have read and understand all instructions.
  • Do not apply if rain is expected within 48 hours.
  • Do a small test area on your project to insure your satisfaction with color choice and appearance before proceeding.

Cleaning the deck:

  • Obviously sweep excess debris (dirt and leaves) off the deck.
  • Clean the deck with Messmer’s Wood & Deck Cleaner (Part A),
  • Rinse thoroughly with clean water
  • Wait a few days for the wood to completely dry depending on weather conditions.
  • Cover plants, grass, concrete, trim, so that no areas get the chemicals on it.

Apply the Messmer’s Hardwood deck stain:

  • Stir Messmer’s thoroughly, so that all pigment is mixed evenly into the stain.
  • Apply one coat of Messmer’s for Hardwood Decks following label directions.
  • Work with the grain.
  • After 30 minutes, brush or roll out any excess product puddled or pooled on the surface of the deck.
  • If excess product is not removed, sticky, shiny spots may remain on the surface.

Maintenance:

Best stain for hardwood decks, best stain for IPE, IPE oil vs Messmers hardwood, Messmers dealers near me, best oil for a IPE deck, Ohio, Illinois. Best stain for IPE decking. IPE vs Penofin. , Home Depot and Lowes

Additional information

Weight 42 lbs
Dimensions 1 × 1 × 1 in
COLOR

Natural, Red Mahogany