Penofin Brown Label Stain & Sealer 2 Gallon Pack

Free Shipping!



 Penofin Transparent Penetrating Oil Finish Stain & Sealer

Penofin® Stain & Sealer offers an easy to use, quality solution to protect and enhance the beauty of wood. Penofin® Stain & Sealer is a penetrating, oil based, semi-transparent wood stain and sealer in one. It has been formulated for both ease of application and to protect and enhance the natural beauty of wood. This formulation offers first class protection from water, mold, mildew, and damaging UV rays. Penofin® Stain & Sealer does not require wiping or back brushing, will not crack, chip or flake and will leave no runs or streaks. Penofin® Stain & Sealer can withstand rain & water within minutes of application, be applied in high temperatures & direct sunlight and is easy to maintain; with no sanding or stripping required for re-application. Penofin® Stain & Sealer is available in four beautiful colors: Natural Cedar, Transparent Redwood, Mission Brown and Dark Walnut. Penofin® Stain & Sealer complies with all national and local air quality regulations. V.O.C. Less than 100 grams/liter.

SURFACE PREPARATION: NEW WOOD: Prior to staining, the entire area should be properly cleaned with Penofin® Pro-Tech Cleaner. Unseasoned wood must be weathered to ensure the moisture content is below 12% for proper application. OLD WOOD: Prior to staining, the entire area should be properly cleaned and brightened with Penofin® Pro-Tech Cleaner and Penofin® Pro-Tech Brightener. Any loose or damaged wood fibers may be removed with a light sanding. MILDEW: Any mildew stains present on the surface prior to application should be removed with Penofin® Pro-Tech Cleaner. Mildew stains are not caused by the coating nor do they represent coating failure. This
product contains agents that inhibit the growth of mold and mildew on the coating’s surface

APPLICATION: : Apply two thin coats or one thick coat.  Surface must be completely dry before application. Stir can thoroughly before use. Apply with a brush, roller, pump sprayer or airless sprayer. No back brushing or wiping is required on vertical surfaces. If pooling and/or
puddling occurs on horizontal surfaces, then remove excess coating with a rag, brush or roller. Do not thin product. Stir occasionally throughout application. Test product for penetration on a small hidden area before proceeding.

RECOAT TIME: Allow 1 hour before applying 2nd coat. Allow 72 hours before returning furniture and heavy use. Extractive Tannin Bleeding is not caused by the coating and does not represent coating failure. TEMPERATURE LIMITS: Heat and direct sunlight have no impact on coating performance. Low temperatures will only impact dry time and prolong full cure time.

DRY TIME: Approximately 24 hours depending on
temperature, humidity and air flow. Wait 72 hours (3 days)
before returning furniture and heavy use.

COVERAGE: 125 – 175 sq. ft./gallon, depending on
moisture content, wood species, age of wood and method
of application.

CAUTION COMBUSTIBLE! Keep this product away from heat, open flame, and sparks. Avoid prolonged contact with skin and breathing vapor or spray mist. Use only with adequate ventilation. Do not take internally. Shelf life is limited once factory seal is broken; secure lid tightly after use. Avoid spontaneous combustion – make sure all rags and brushes are soaked in water, stored in an airtight container, or otherwise disposed of safely. Mineral Oil based stain


Next day shipping to Michigan, Ohio, Indiana, Illinois and Wisconsin. Comparable to Ready Seal goof proof fence stain in Texas





Additional information

Weight 18 lbs
Dimensions 1 × 1 × 1 in

, , ,