Description

Messmers UV Plus Samples come in 1/4 pint cans. Samples are only meant to show how the color will appear on your wood and is not a representation of finish or performance. Recommended to be used on a small test area.

Description

Messmer’s UV Plus stain is a premium natural wood finish that protects and beautifies exterior wood decks, siding, fences, log homes. Penetration oil finish for all exterior woods. Messmer’s stain is a low VOC stain that can ship to all states

Messmers UV Plus Orders placed by 4:00 ship same day

Messmer’s UV Plus stain

• Excellent resistance to UV degradation
• Available in 18 colors
• has a mildew Resistant Coating
• will not peel when properly applied
• Allows you to protect and beautify your wood while maintaining a natural appearance.
• It will change the color of the wood but not the texture, and will not obscure the natural wood grain.
• Colors range from lightly pigmented toners to semitransparent stains.
• a one coat product
• Does not require any top coats or pretreatments before application.

Messmers stain and sealer

• One coat product
• Does not require any top coats or pretreatments before application.
• You can use it on wood decks, fences, siding, log homes
• Performs great overall on nearly all exterior wood surfaces.
• Avoid over-application
• We recommend surface and air temperatures between 45F and 90F

Find all of Messmer’s products here!

Coverage of Messmer’s Top rated stain

• UV Plus, one gallon for every 100-150 (rough) or
• 150-200 (smooth) square feet of wood surface
• Apply stain  with a 4″ natural bristle brush with handle
• Contractors typically use a 4 3/4 100% natural bristle brush by Wooster F5116
• Roller , 3/8″ nap roller cover to stain the deck.

Recommended cleaning prior to coating

• Messmer’s Wood & Deck Cleaner (Part A) (omit if the deck is already cleaned)
• Messmer’s Wood & Deck Brightener (Part B) (optional – use only on redwood and some cedars)

Follow instruction for Messmer’s UV Plus stain

• Do not apply if rain is expected within 48 hours.
• In certain climates, you may have to wait for a different time of year to do this.
• We recommend doing a small test area on your project to insure your satisfaction with color choice and appearance before proceeding with the entire job.
• Clean the deck, and brighten if necessary:
• Sweep excess debris (dirt and leaves) off the deck.
• Clean the deck with Messmer’s Wood & Deck Cleaner (Part A), or another high-quality wood cleaner of your choice, then rinse thoroughly with clean water.
• For redwood and some cedars, use Messmer’s Wood and Deck Brightener (Part B) to remove tannin stains, which are dark discolorations from natural extractives in the wood.
• Rinse thoroughly after brightening with the Wood & Deck Brightener.
• Make sure the deck surface is clean, dry and in good condition.
• You may need to wait a few days for the wood to completely dry depending on weather conditions.
• Cover plants, grass, concrete, trim, and any other areas you don’t want stained.
• Apply Messmer’s UV plus deck stain: Stir Messmer’s UV plus thoroughly.
• Make sure that all pigment is mixed evenly into the stain.
• Apply one coat of UV Plus following label directions.
• Work with the grain.
• Brush or roll out any excess product puddled or pooled on the surface of the deck within 30 minutes.
• If excess product is not removed, sticky, shiny spots may remain on the surface.
• It does not form a surface film when properly applied and is not subject to peeling and flaking

Clean-up:

• Following label directions, dispose of waste including roller covers and brushes in a water filled container.
• Seal the container and dispose of it properly.
• Paint thinner or mineral spirits cleanup

Why doesn’t Messmer’s UV Plus bead water

• Water beading is accomplished by adding waxes or paraffin to the stain.
• These additives do not last very long and are not good permanent water repellents,
• The high solids content of UV Plus fills the pores of the wood, providing excellent water repellency that will last.

How long will Messmer’s UV Plus stain last?

• Typically UV Plus needs to be reapplied every one to three years.
• The length of time will vary depending on the wood used, the way the deck is constructed.
• On vertical, smooth surfaces, Messmer’s UV Plus can be expected to last for 2-3 years,
• on rough surfaces, 3-4 years and
• on decks 1-2 years

Searching for:

Messmers stain reviews | Messmers vs IPE Oil | Messmer’s UV Plus near me | Messmer’s New York Dealers | Messmer’s vs Penofin

Messmers UV Plus Colors:

Natural | Natural Cedar | Natural Redwood | Mission Oak | Colorado Brown | Lakeside Oak |Oxford Brown | Dark Walnut | Oak Brown | Navajo Red | Sequoia Red | Pine | Driftwood Gray | Charcoal Gray | Cape Cod Gray