Description
Deckwise Ipe Oil stain is a top rated natural hardwood deck finish features a special formulation for exotic hardwood decking and siding to ensure exceptional protection with very little rising of the wood grain. It stabilizes and nourishes hardwoods from within. Best oil for IPE hardwood wood decks.
Deckwise Ipe Oil 100 Voc – California LA County – Order Here
Home-owners and Pro contractors appreciate the elegance of well-maintained hardwood deck or the sleek surface of hardwood rain screen siding. Nevertheless, not many realize that safeguarding hardwoods from the harmful impact Ultraviolet sun rays and dampness will add many years to the lifetime of their patio or exterior hardwood siding.
Each and every hardwood deck owner has made a great investment in the lavish natural hardwood beauty that will survive for years if it is properly sealed. Ipe Oil® is an oil based hardwood stain exclusively formulated to dry properly on Ipe, Mahogany, Cumaru and also many other oily exotic lumber that trigger finish drying trouble for other brand names.
Use Deckwise cleaner & brightener for best results prior to sealing IPE wood
Ipe Oil™ Hardwood Deck Finish is an oil-based natural wood finish and stain that will leave IPE wood looking wet. It is specifically formulated to protect and preserve the natural beauty of exterior hardwood decks. Ipe Oil™ Hardwood Deck Finish by Deckwise provides excellent penetration of even the densest hardwoods with minimal raising of the grain. It protects and conditions the wood while maintaining a completely natural appearance. For exceptional results on Ipe, Tigerwood, Cumaru and other exotic hardwoods, Ipe Oil™ stain by Deckwise is the best solution. Don’t forget to use End Grain Sealer for the end grains
Exotic IPE oil stain
- Penetrating stain
- Semi-transparent natural stain
- UV protection
- 1 coat application
- Mildew resistant formula
Oil stain
The most important thing with any oil finish is making sure the surface is clean and dry before application. This will go a long ways towards reducing the likelihood of any mildew growth on the wood. As fungicides are only designed to inhibit the growth of mildew on the stain, not kill existing spores that may be on the wood before applying. Please prep wood prior to sealing with Deckwise IPE oil stain.
Our hardwood oil deck stain contains a precise combination of linseed oil for maximum wood grain penetration, oil solids for longevity and organic oils for color depth and water repelling features. Translucent iron oxide pigments are additionally added to warrant UV absorption. Ipe Oil® allows wood to breathe, which inturn is essential in working with exotic hardwoods such as Tigerwood, Massaranduba, Teak, Brazilian Redwood, and many other wood species. The result following years of development is a hardwood oil finish of unmatched overall performance designed to protect ones exotic wood surfaces, rich with color and dimension.
IPE oil is a penetrating stain
Most deck finish coatings form a film on the surface to offer natural wood color and keep moisture out. Some brands may last just a few months or two before they turn unsightly. Nevertheless many film coatings fail, and also require sanding or stripped before the hard wood can be re-coated.
Ipe Oil then again, penetrates into the wood grain and defends from within and is not a surface film that will bubble, crack, or peel. Decking and hardwood siding restoration is a simple clean, brighten and re-coat. No major sanding or stripping should be needed. And hardwood which is left to discolor to a silver patina gray after coating, can be effortlessly restored to a gorgeous natural timber look even after many years of weathering.
Paint thinner or mineral spirits clean-up
Seal the End grains with Anchor Seal-Click her to purchase
Brush, Roller & Rag Application:
For the best results, utilize a high quality 3/8” nap roller, pad applicator or stain brush. To minimize lapping, maintain a wet edge lengthwise and do not break in the middle of boards. One coat is sufficient for most applications. Always apply oil onto the boards parallel to the grain of the wood. For exterior home furniture hand apply the finish into the hardwood grain simply by using a soft cloth. NOTE: Product not absorbed into the wood within 30-45 minutes must be thoroughly removed.
Spray Application:
When spraying, back brush or roll to prevent sags and runs. Cover surrounding areas to protect from over spray. For airless spray, use .015” to .019” tip size for best results. NOTE: Product not absorbed into the wood within 30-45 minutes must be thoroughly removed.
Wipe Off Excess:
Depending on temperature and direct sunlight verses shade, soak time may need adjusted. It is essential to wipe excess oil completely and attention paid to pooling after application. Continue to wipe excess oil until no surface sheen or leeching is noticeable. Wood surface must NOT look wet and will have a matte finish.
Maintenance:
Clean and brighten hardwoods at least once a year with Deck & Wood Cleaner Part 1 and Deck & Wood Brightener Part 2 or use the Woodrich Deck Maintenance Kit with all the products and tools needed in one handy package. Apply Ipe Oil for Hardwood Decks every one to two years in most applications for desired natural hardwood color.
Coverage:
Smooth Wood: 250-300 sq ft / gallon
Rough Wood: 150-250 sq ft / gallon
*Coverage on dense hardwoods
IPE oil vs Messmer’s Hardwood stain
Deckwise IPE oil vs Penofin
Contact the Deckwise IPE Oil stain manufacturer for technical assistance
We beat Amazon prices. | Penofin vs Messmers | Longest lasting ipe stain | Deckwise Ipe Oil stain near me | Deckwise IPE oil stain dealers | Deckwise IPE Oil Plus | Deckwise IPE Oil samples | Not available at Lowes or Home Depot
