U-C Coatings Anchorseal 2

Free Shipping!



ANCHORSEAL® 2 is a hybrid of plant-based polymers and wax that protects the ends of green logs and lumber from checking and splitting. It is a high-performance, economical choice for customers.

ANCHORSEAL 2 is best-in-class for the protection of exotic hardwood decking. When carefully applied to the freshly cut ends of tropical hardwoods, such as ipe, Brazilian walnut, mahogany and tigerwood, ANCHORSEAL 2 prevents up to 90% of end checking, protecting your investment and extending the life of the deck.


  • Hardwood logs and lumber
  • Tropical hardwood lumber
  • Exotic hardwood decking
  • Ipe decking
  • Woodturning blanks
  • Log “cookies”
  • Live-edge wood slabs


  • Prevents up to 90% of drying splits
  • Prevents end checking in deck boards
  • Improves yield with less waste
  • Water based
  • Non-hazardous
  • No solvents
  • Available in summer and winter formulas
  • Soap and water cleanup

  Helps prevent blue stain and sapstain caused by damaging fungi • Water based, non-toxic formula, soap & water clean-up • Available in clear or more than 35 colors • Winterized formulas available

Coverage: 100 sq. ft./gallon, depending on application method and wood species.

Surface Preparation

  • All areas to be coated should be clear of dirt and debris


  • Apply ANCHORSEAL 2 using a brush, roller or sprayer until it begins to drip slightly
  • For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
  • If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
  • Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
  • If applying to the cut ends of deck boards: apply ANCHORSEAL 2 carefully with a thin brush or sponge applicator. To avoid potential staining, do not allow ANCHORSEAL 2 to get on the face of the boards.
  • If you need a deck end cut sealer that penetrates below the surface of wood that can be painted or stained over, we recommend SEAL ENDS ONCE (also made by U-C Coatings)

Cleanup & Storage

  • Clean application equipment using hot soapy water
  • Store unused ANCHORSEAL 2 above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage

Additional information

Weight 9 lbs
Dimensions 9 × 9 × 9 in

Quart, Gallon