Messmers UV Plus Samples

$19.95
Product total
Options total
Grand total

Description

Messmers UV Plus Samples come in 1/4 pint cans. Samples are only meant to show how the color will appear on your wood and is not a representation of finish or performance. Recommended to be used on a small test area.

Description

Messmer’s UV Plus stain is a premium natural wood finish that protects and beautifies exterior wood decks, siding, fences, log homes. Penetration oil finish for all exterior woods. Messmer’s stain is a low VOC stain that can ship to all states

Messmers UV Plus Orders placed by 4:00 ship same day

Messmer's UV Plus stain

Messmer’s UV Plus stain

  • Excellent resistance to UV degradation
  • Available in 18 colors
  • has a mildew Resistant Coating
  • will not peel when properly applied
  • Allows you to protect and beautify your wood while maintaining a natural appearance.
  • It will change the color of the wood but not the texture, and will not obscure the natural wood grain.
  • Colors range from lightly pigmented toners to semitransparent stains.
  • a one coat product
  • Does not require any top coats or pretreatments before application.

Messmers stain and sealer

  • One coat product
  • Does not require any top coats or pretreatments before application.
  • You can use it on wood decks, fences, siding, log homes
  • Performs great overall on nearly all exterior wood surfaces.
  • Avoid over-application
  • We recommend surface and air temperatures between 45F and 90F

Find all of Messmer’s products here!

Coverage of Messmer’s Top rated stain

Recommended cleaning prior to coating

Follow instruction for Messmer’s UV Plus stain

  • Do not apply if rain is expected within 48 hours.
  • In certain climates, you may have to wait for a different time of year to do this.
  • We recommend doing a small test area on your project to insure your satisfaction with color choice and appearance before proceeding with the entire job.
  • Clean the deck, and brighten if necessary:
  • Sweep excess debris (dirt and leaves) off the deck.
  • Clean the deck with Messmer’s Wood & Deck Cleaner (Part A), or another high-quality wood cleaner of your choice, then rinse thoroughly with clean water.
  • For redwood and some cedars, use Messmer’s Wood and Deck Brightener (Part B) to remove tannin stains, which are dark discolorations from natural extractives in the wood.
  • Rinse thoroughly after brightening with the Wood & Deck Brightener.
  • Make sure the deck surface is clean, dry and in good condition.
  • You may need to wait a few days for the wood to completely dry depending on weather conditions.
  • Cover plants, grass, concrete, trim, and any other areas you don’t want stained.
  • Apply Messmer’s UV plus deck stain: Stir Messmer’s UV plus thoroughly.
  • Make sure that all pigment is mixed evenly into the stain.
  • Apply one coat of UV Plus following label directions.
  • Work with the grain.
  • Brush or roll out any excess product puddled or pooled on the surface of the deck within 30 minutes.
  • If excess product is not removed, sticky, shiny spots may remain on the surface.
  • It does not form a surface film when properly applied and is not subject to peeling and flaking

Clean-up:

  • Following label directions, dispose of waste including roller covers and brushes in a water filled container.
  • Seal the container and dispose of it properly.
  • Paint thinner or mineral spirits cleanup

Why doesn’t Messmer’s UV Plus bead water

  • Water beading is accomplished by adding waxes or paraffin to the stain.
  • These additives do not last very long and are not good permanent water repellents,
  • The high solids content of UV Plus fills the pores of the wood, providing excellent water repellency that will last.

How long will Messmer’s UV Plus stain last?

  • Typically UV Plus needs to be reapplied every one to three years.
  • The length of time will vary depending on the wood used, the way the deck is constructed.
  • On vertical, smooth surfaces, Messmer’s UV Plus can be expected to last for 2-3 years,
  • on rough surfaces, 3-4 years and
  • on decks 1-2 years

Searching for:

Messmers stain reviews | Messmers vs IPE Oil | Messmer’s UV Plus near me | Messmer’s New York Dealers | Messmer’s vs Penofin

Messmers UV Plus Colors:

Natural | Natural Cedar | Natural Redwood | Mission Oak | Colorado Brown | Lakeside Oak |Oxford Brown | Dark Walnut | Oak Brown | Navajo Red | Sequoia Red | Pine | Driftwood Gray | Charcoal Gray | Cape Cod Gray

Additional information

Weight 1 lbs
Dimensions 1 × 1 × 1 in
Sample Color

2 Colors