Sikkens Proluxe Cetol Log & Siding 3 Gallon Pack

Free 2 day same day shipping – All colors in stock – Authorized Dealer...

$280.95
Clear

Description

PPG Proluxe Cetol Log & Siding Color Chart:

Twin Creeks Log Homes

Official PPG Sikkens Proluxe Online Dealer

All colors in stock and ships same day 8-5 EST – Free 2 Day Shipping

Due to VOC laws, we are UNABLE to LEGALLY SHIP LOG & SIDING to the following areas below:

COLORADO, CONNECTICUT, DELAWARE, MARYLAND and NEW YORK

We cannot ship Log & Siding to these Counties in Utah:

BOX-ELDER, CACHE, DAVIS, SALT LAKE, TOOELE, UTAH and WEBER

We cannot ship Log & Siding to these Counties in California including South Coast Air Quality Management District (SCAQMD)

ALAMEDA, CONTRA COSTA, EL DORADO, FRESNO, IMPERIAL, KERN, KINGS, L.A., MADERA, MARIN, MERCED, MONTEREY, NAPA, ORANGE, PLACER, RIVERSIDE, SACRAMENTO, SAN BENITO, SAN BERNARDINO, SAN DIEGO, SAN FRANCISCO, SAN JOAQUIN, SAM MATEO, SANTA BARBARA, SANTA CLARA, SANTA CRUZ, SOLANO, STANISLAUS, SUTTER, TULARE, VENTURA, YOLO and YUBA

Proluxe Maintenance is clear and to be used as a maintenance coat.

Previously know as Sikkens Cetol Log & Siding Finish. Akzo Nobel (Manufacturer of Sikkens) sold their North American Architectural Coatings division to PPG.

Since 2017, The PPG ProLuxe product line will contain all of the same Sikkens-ProLuxe products and formulas, but will now showcase the updated PPG ProLuxe name and new packaging featuring the PPG logo and removal of the Sikkens name and will be named PPG Proluxe Log & Siding, a high solids Alkyd with a transparent satin Finish.

PPG Proluxe Sikkens Cetol Log & Siding is a high performance, translucent satin finish for exterior vertical surfaces. This oil-alkyd high solids formulation offers optimum protection and a premium look in just two coats. The high solids alkyd resin used in Cetol Log & Siding is another example of the advancements central to the Sikkens Next Wave Technology

Color Samples: Sikkens Proluxe is available for sale in 4oz sample containers.  They are liquid samples that give you an accurate color on you wood surface.  We also include a coupon with your samples for you to use.  Click here to view samples

Description: Cetol Log & Siding is a high-performance translucent satin finish for exterior vertical wood surfaces. This alkyd high solids formulation offers optimum protection and a premium look in just two coats.

Key Features:

  • Creates a durable surface barrier to prevent weathering
  • Allows natural characteristics and grain of wood to show through
  • Minimizes cracking due to expansion and contraction of wood

Transparency: Translucent film forming

Application: Sikkens Proluxe Cetol Log & Siding can be rolled, brushed or sprayed. To spray using an airless sprayer using a .011”-.013” tip at 1200 – 1700 psi. To prevent drips back brush after a few minutes.

Sheen: Satin finish and film forming

Technology: Solvent based or oil based stain with next wave technology. Log and Siding is a high solids alkyd resin technology

Usage: All types of exterior wood, however recommend for log homes

Recommended for: Siding, Logs, Trim

Clean Up: 

  • Mineral Spirits
  • Paint thinner
  • Turpentine

Dry Time:(At 78º F (20º C) and 65% relative humidity) Temps below 50º F will require longer drying times.

  • Dries to re-coat in 24 hours
  • Dries to touch in 6 hours

Number of coats: PPG Proluxe is a 2 coat system

Sikkens Proluxe Cetol Log and Siding Coverage Rates

• On rough and weathered surfaces, 150-225 sq. ft./gallon.
• On smooth surfaces or hardwoods, 300-400 sq ft./gallon.
• Actual coverage may vary depending on the type, age and texture of the wood and application method.

Recommended Chinking or Log filler: Sashco Log Jam Chinking and Sashco Conceal “Sikkens color matching caulk” for the smaller cracks. Use backer rods to fill in the larger gaps before using chinking.

Wood peckers or insects?  Add Walla Walla Bug juice to the stain.

Preparation Procedures for New, Weathered and Uncoated Wood:

The best method to prepare vertical wood surfaces is to sand with 80 – 120 grit sandpaper. However, the following preparation may be used as an alternate to sanding: Spray the surface with clean water, wetting the wood.

  • Recommend cleaning the surface with a deck cleaner or stripper
  • Apply this solution generously to the wood with a garden pump sprayer.
  • Let the solution sit on the wood for 15 – 20 minutes.
  • During this period, scrub the surface with a hard bristle brush to help remove mill glaze and/or weathering.
  • Do not let the solution dry on the wood.
  • Keep it wet as your are working. Do your best to work on the sides opposite of the sun.
  • Power wash the cleaning solution from the wood with clean water.

To prevent damaging the wood, do not exceed 500 PSI. The nozzle must be a maximum of one (1) foot from the surface for full effectiveness. Let the surface dry for three (3) days before application (i.e. the moisture content is below 18%).

Weathered gray wood, or wood affected with blue fungi or rust from nails may be treated, after cleaning with the TSP solution, by applying a solution of four (4) ounces of oxalic acid crystals in a gallon of warm water. This solution should be allowed to sit on the affected area for 15 – 20 minutes before the final rinse with a power washer. Do not let the solution dry on the surface. After treatment, allow surface to dry for three (3) days. Fill all joints, cracks, and nail holes with a high quality polyurethane or acrylic caulk/filler and let cure prior to applying the coating system. Refer to caulk/filler manufacturer for proper application.

Application on hardwoods,

Wipe the surface with acetone immediately prior to application.

Rough-sawn wood with less than four (4) weeks outside exposure should be dry brushed with a stiff bristle brush to remove loose dirt, fiber and debris. Follow standard preparation procedures if exposure has been longer than four (4) weeks or dirt and debris remain visible. New pressure treated lumber requires a six (6) week drying period prior to application.

Water repellant treated lumber requires one (1) year of weathering prior to application. On previously coated wood, all old coatings must be completely removed before applying the first coat of any PPG Cetol system.

Application for Pine, Spruce, Cedar and other logs

Standard Application Procedure: It is always recommended to perform a two (2) coat color and sheen test on a sample of the wood. Color can vary with application, porosity and type of wood. Intermix batches to ensure color consistency. After preparation apply two (2) coats of Proluxe Cetol Log & Siding assuring thorough dry time (minimum 24 hours) between coats.

  • If possible, back prime with the first coat. During application, saturate all end grains, nail holes, cavities, and cracks in the wood with Sashco Log Builder or Conceal color matching caulk to Sikkens Log and Siding colors.
  • Brush on a liberal coat and maintain a wet edge to prevent lap marks. Recommended natural bristle brush with a handle where a pole can be inserted for ease of use.
  • Brush in the direction of the wood grain starting at one end of the board or log and continuing to the other end of the board or log.
  • The first coat of any Cetol system should be applied from the bottom up to avoid drips which may streak on the surface below.
  • Follow recommended maintenance procedures and schedule.
  • Cetol Log & Siding is compatible over an existing Cetol 1 and Cetol 23 Plus system. Cetol Log & Siding needs UV light to cure properly.
  • The side that gets the least sun – You can use Cetol Maintenance Clear

The absence of UV light will significantly slow the drying process.

Wood peckers and insects?  Add Walla Walla Bug juice to the stain.

Proluxe Cetol® Log & Siding Log Application Procedure:

Kiln-dried or Air Dried Logs: It is always recommended to perform a two (2) coat color and sheen test on a sample of the wood. Color can vary with application, porosity and type of wood. Generally, the moisture content of these logs is below 18%. However, some logs may have a moisture content higher than 18%. Therefore, it is recommended to apply Sikkens Log Pre-Treatment and then allow a six (6) month drying period before applying Cetol Log & Siding. Follow preparation procedure before applying first coat of Cetol Log & Siding.

During application, saturate all end grains, nail holes, cavities, and cracks in the wood. Brush on a liberal coat and maintain a wet edge to prevent lap marks. Brush in the direction of the wood grain starting at one end of the board or log and continuing to the other end of the board or log.

The first coat of any Cetol system should be applied from the bottom up to avoid drips which may streak on the surface below. Follow recommended maintenance procedures and schedule. Green, Wet, or Treated Logs: It is always recommended to perform a two (2) coat color and sheen test on a sample of the wood. Color can vary with application, porosity and type of wood. These logs have a moisture content greater than 18%. Therefore, it is recommended to apply Sikkens Log Pre-Treatment and allow a one (1) year drying period before applying Cetol Log & Siding. Follow preparation procedure before applying first coat of Cetol Log & Siding. During application, saturate all end grains, nail holes, cavities, and cracks in the wood. Brush on a liberal coat and maintain a wet edge to prevent lap marks. Brush in the direction of the wood grain starting at one end of the board or log and continuing to the other end of the board or log. The first coat of any Cetol system should be applied from the bottom up to avoid drips which may streak on the surface below. Follow recommended maintenance procedures and schedule. Application Over Borate Treatments:

Do not apply any Sikkens Cetol system over a fresh, borate-treated wood surface.

Allow the borates to diffuse into the wood cells by allowing a six (6) month exposure time (12 months for green logs) before application of Cetol Log & Siding. To prevent borates from leaching out of the exterior surface, we recommend the application of Sikkens Log Pre-Treatment over the borate treatment. Before the application of Sikkens Log Pre-Treatment, allow the borate treatment to dry for three (3) good, sunny days. Just prior to the application of the appropriate Cetol system, the log surface must be cleaned thoroughly according to the Sikkens preparation procedures.

When borate treatments are applied, it is always advised to follow the manufacturer’s recommendations. Maintenance Procedure and Schedule: Proper maintenance starts with visual inspection. A time-frame of two (2) – three (3) years on the south and west exposures and three (3) – four (4) years on the north and east exposures can be used as a general guideline. However, as weathering, exposure conditions, altitude, and applications can vary, maintenance may be needed sooner and should be performed when visually necessary, regardless of timeframe.

Before application of a maintenance coat, prepare the surface using the previously mentioned cleaning solution but reduce the amount to two (2) ounces of 100% powdered Tri-Sodium Phosphate or phosphate-free substitute. Let the surface dry three (3) days after power washing. Apply one (1) coat of Cetol Log & Siding or Cetol Maintenance. Please refer to the Cetol Maintenance Technical Data Sheet for specific guidelines on appropriate use.

Sico Proluxe is The name Sikkens is sold in Canada.

Sikkens Canada is an international brand of coatings, stains, and paints. The company has a long history of producing premium solutions for wood applications. Above all, it offers its products on the Canadian market, where there are numerous log homes and cabin owners.

PPG Log and Siding colors:

SIK42005 NATURAL OAK 005

SIK42009 DARK OAK 009

SIK42072 BUTTERNUT 072

SIK42077 CEDAR 077

SIK42078 NATURL 078

SIK42085 TEAK 085

Searching for: Best log home stain | Sikkens log and siding | Is Proluxe the same as Sikkens | Sikkens dealers near me | Lowest price on Sikkens Log & Siding | Teak 085 | Sikkens stain reviews | Sikkens Products | Where to buy Sikkens Proluxe stain | Sikkens stain reviews | Is Sikkens stain good | Sikkens clear coat | Cetol filter 7 | Recoating Sikkens | Log rot and maintenance | Where to buy Sikkens in Canada| What is Sikkens called now |  Canada | Sico Proluxe Canada

The Stain Depot is located 20 minutes from the bridge into Canada and 25 minutes from the tunnel into the Canadian border. We are 45 minutes away from the Blue Water bridge in Port Huron into Canada.

29500 Six Mile, Livonia, MI 48152

ThestainDepot@gmail.com

Montana, Texas, Michigan, Ohio, Tennessee, Kentucky, Essex County Canada,  Proluxe Sikkens Log home stain dealer near me. Sikkens dealer 2 day shipping.

Providences in Canada

Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland and Labrador
Nova Scotia
Ontario
Prince Edward Island
Quebec
Saskatchewan

 

Additional information

Weight 27 lbs
Dimensions 1 × 1 × 1 in
COLOR

078 Natural, 077 Cedar, 005 Natural Oak, 009 Dark Oak, 085 Teak, 072 Butternut, 996 Natural Light